Piranha P-90 Ironworker

The 90 Ton Piranha Model P-90 picks up where the Piranha P-65 Ironworker leaves off – for applications requiring more tonnage.

 

Request Quote
Categories: , ,

Description

The 90 Ton Piranha Model P-90 picks up where the Piranha P-65 Ironworker leaves off – for applications requiring more tonnage.

  • The P-90 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
  • The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds.
  • The P-90 has full electrical control of its stroke with a footswitch and limit switch stroke controls.
  • The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90’s capabilities.
  • Piranha’s incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part – from any angle.

 

P-65 is depicted here.

The 90 Ton Piranha Model P-90 picks up where the Piranha P-65 Ironworker leaves off – for applications requiring more tonnage.

  • The P-90 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
  • The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds.
  • The P-90 has full electrical control of its stroke with a footswitch and limit switch stroke controls.
  • The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90’s capabilities.
  • Piranha’s incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part – from any angle.

MAXIMUM SPECIFICATIONS (rated on mild steel)

Punching (90 Tons) 1-1/8” diameter through 1” plate
Throat Depth 10”
Bending (Optional) 12” up to 24” w/4-way die block
Round Bar Shear 1/2” through 2”
Square Bar Shear 1/2” through 1-3/8”
Flat Bar Shear 18” x 1/2”, 12” x 3/4”, 8″ x 1″
Angle Shear 5” x 5” x 1/2”
Coping/Notching 3-1/2” x 5” x 1/2”
Motor 10 HP
Weight 4,250 Lbs.