Quantum Machinery Band Saws

Band Saw with Hydraulic Downfeed

PRICING STARTS AT $6,300

The Quantum Special 330 CSO Band Saw machine is equipped with bow falling, controlled by a hydraulic circuit upon cutting, bar feeding, and manually operated vice closure, with a manual head return. The vertical rotation on bolt with adjustable tapered bearings without backlash. The SPECIAL 330 CSO has a high-capacity band control by means of a two-speed motor and special reducer with bronze gear, tempered, and ground worm screw. Electrical: The S-330-CSO can be brought in at either 220 Volt / 3 Phase, 220 Volt / 1 Phase, or 480 Volt / 3 Phase.

  • Round Tube Cutting at 90° – 10.2″
  • Round Tube Cutting at 45° Left – 8.85″
  • Round Tube Cutting at 45° Right – 8.4″
  • Round Tube Cutting at 60° Right – 5.1″
  • Square Tube Cutting at 90° – 10″
  • Square Tube Cutting at 45° Left – 8.25″
  • Square Tube Cutting at 45° Right – 7.8″
  • Square Tube Cutting at 60° Right – 5.1″
  • Rectangular Tube Cutting at 90° – 8.6″ Height x 12.75″ Width
  • Rectangular Tube Cutting at 45° Left – 6.2″ Height x 8.8″ Width
  • Rectangular Tube Cutting at 45° Right – 6.2″ Height x 8.25″ Width
  • Rectangular Tube Cutting at 60° Right – 5.1″ Height x 5.5″ Width
  • Maximum Vice Opening: 330mm (12.9″)
  • This saw can run at 2 different speeds (38-78 R.P.M.)

Here are a few notable features of the SPECIAL 330 CSO:

  • Appropriately dimensioned flywheels.
  • Strong band guides with tight stress-raiser bearings and adjustable widia tips.
  • Band stretching is obtained by elector-mechanical blade tensioner with microswitch.
  • Vice with a device for quick approach
  • Wide rotating material support table
  • Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.
  • Cutting thickness 1.2 mm
  • Cutting range 45° left – 60° right
  • Adjustable stop for cuts of the same size
  • 24 V low tension plant
  • 0.06 kW power-driven pump for band cooling

The basic characteristics of the machine, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.

  • Round Tube Cutting at 90°: 8.6″
  • Round Tube Cutting at 45° Right: 6.25″
  • Round Tube Cutting at 60° Right: 4″
  • Square Tube Cutting at 90°: 8.4″
  • Square Tube Cutting at 45° Right: 5.9″
  • Square Tube Cutting at 60° Right: 3.35″
  • Rectangular Tube Cutting at 90°: 6″ Height x 9.75″ Width
  • Rectangular Tube Cutting at 45° Right: 4.25″ Height x 6.25″ Width
  • Rectangular Tube Cutting at 60° Right: 3″ Height x 3.5″ Width
  • Maximum Vice Opening: 315mm (12.4″)
  • This saw can run at 2 different speeds (32-66 R.P.M.)